Aim and Scope
The Journal of nanotechnology in medicine is a open access journal aimed at publishing global leading research and is dedicated to being the primary platform for research in all technical areas of Nano Technology. It will encompass original research and review papers in Medicine, Machines, Smart dust, and other related areas. Nanotechnology are the study and application of extremely small things, which is about 1 to 100 nanometers and can be used across all the other science fields, such as chemistry, biology, physics, materials science, and engineering.
Annual Subscriptions of print and online allow you to access all content published in the journal
Advertisements for your product at our website, Article issues and conferences.
Purchasing of print copies of individual articles and books
Request permission to use or reproduce Articles
Subscribe or Unsubscribe from Email Notification
About the Journal
About the Journal
The journal of nanotechnology in medicine publish the latest and outstanding original Research articles, reviews, and letters in all the areas of Nano technology and nano medicine It covers a broad range of topics including but not limited to, Advanced Nano-materials, Applications of Nano-biotechnology to Clinical Science, Ethical and Social Aspects of Nano-medicine, Future in Nano-medicine, Impact of Nano-medicine on Health Care, Intelligent Biomaterials and Smart Implant, Material Science and Engineering, Medical Nano-materials and Nano-devices, Medical Nano-robotics, Nano-drug Delivery for Neurological Disorders, Nano-fiber Based Scaffolds for Tissue Engineering, Nano-particles, Nano-materials, Nano-medicine in Cancer Therapeutics, Nano-metrices for Cell Culture, Nano-particle Based Drug Delivery, Nano-technology and Surgery, Nano-therapeutics and Diagnosis, Pharmaceutical Nanotechnology and Polymer Nanotechnology
Each manuscript must be accompanied by a statement that it has been neither published nor submitted for publication, in whole or in part, either in a serial, professional journal or as a part in a book which is formally published and made available to the public. For the mutual benefit and protection of authors and publishers, it is necessary that authors provide formal written consent to publish and transfer of copyright form before publication of the work.
Proofs will be sent to the corresponding author and should be returned with one week of receipt. Corrections should be restricted to typesetting errors; any other corrections may be charged to the authors. Authors are advised to check their proofs very carefully before return since the inclusion of late corrections maybe be chargeable (30% of the publication cost). Corrected proofs are to be returned to the publishers with copyright form, registration form, and Payment proof
The benefit of publishing in International Journal includes,
- Doi, Crossref. and UNR is allotted for all manuscripts.
- Rapid review process
- Open Access journals
- Qualified and sincere Editorial team members
- Publication immediately after acceptance
- Quality & fast editorial- review processing
- All abstracts and full text available free online to all main universities worldwide
- Ensures promotion to the widest possible audience
Submission Preparation Checklist
As part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.
- The submission has not been previously published, nor is it before another journal for consideration (or an explanation has been provided in Comments to the Editor).
- The submission file is in Microsoft Word document (.doc) file format.
- Where available, URLs for the references have been provided.
- The text is single-spaced; uses a 12-point font; employs italics, rather than underlining (except with URL addresses); and all illustrations, figures, and tables are placed within the text at the appropriate points, rather than at the end.
- The text adheres to the stylistic and bibliographic requirements outlined in the Author Guidelines, which is found in About the Journal.
- If submitting to a peer-reviewed section of the journal, the instructions in Ensuring a Blind Review have been followed.
Manuscript Title (16 Bold)
First Writer1, Second Writer2, Willy C 3, * (12 Font Size)
1,2Department, affiliation, Country (10 Font Size, Italic),
3Mechanical Engineering, Oxford University, USA (10 Font Size, Italic)
Abstract: (10Font size, Bold) Objective: the abstract body be supposed to review the content of the manuscript. Aim to remain the abstract below 220 text words. Do not make references, abbreviated words, and equations in the abstract. The journal will be published from the same sized copy submitted by you. Method: the title be supposed to appear on a separate page which be supposed to then follow by the writer's name and the institution name and address by indicating suitable superscripts. Title page be supposed to contain the title of the manuscript in bold face, title case (16 font size, uppercase), the names of the writers in normal face (12 font size, lower case, bold) followed by the afilation address in normal face lower case (font size 10). An asterisk (*) should be placed after the corresponding writer's name as superscript whose e-mail id, fax, telephone number can be given at the bottom left corner of the title. Results: corresponding writer has the responsibility to make sure that all co writers are responsive and consent the contents of the manuscript. Conclusion: this will enable us to keep uniformity in the final printed copies of the journal. Please keep in mind that the manuscript you arrange will be photographed and printed as it is received. Keywords writer(s) should give about 5 key words which can identify the most important subjects covered by the manuscript. They should be placed at the end of the abstract. (10 font size, italic)
Keywords: (10 Font Size, Bold): Keyword1; keyword2; about five key words in alphabetical order; separated by semioclon (10Font Size, Italic)
Citation: First writer, Second writer & third writer, ( 2015). Effect of Graphene Filler Content on Mechanical Strength and Hardness for Goat Hair Fibre Reinforced Epoxy Composites. International Journal of Xxxxxxxxxx, X(X), XXX-XXX. doi:10.4273/PENCIS.7.4.10
*Correspondence: Dr. Willy Chou, Department of Recreation and Health-Care Management and Institute of Recreation Industry Management, Chia Nan University of Pharmacy, Tainan, Taiwan. Tel: 886-6-2812811, email: [email protected]
Received: XX August 20XX Revised: XX September 20XX, Accepted: XX October 20XX
Open access policy: This open-access article is distributed under the terms of the Creative Commons Attribution Non-Commercial License (creativecommons.org), which permits reuse, distribution and reproduction of the article, provided that the original work is properly cited and the reuse is restricted to noncommercial purposes. For commercial reuse, contact [email protected]
Introduction (10 Font size, bold)
The introduction of the manuscript is supposed to explain the nature of the problem, previous work, purpose, and the contribution of the manuscript. The contents of each section may be provided to understand easily about the manuscript. The reference should be provided in square bracket, e.g.,  for all references (10 Font size)
Headings (10 Font size, bold)
Subtitle (10 Font size Bold, Italic)
Headings (10 Font size Font size, Italic)
The headings and sub-headings, first with "1. Introduction", appear in proper case letters and be supposed to be set in bold and aligned flush left. All headings from the Introduction to Acknowledgements are numbered sequentially using 1, 2, 3, etc. Subheadings is numbered 1.1, 1.2, etc. If a subsection should be further divided, the numbers 1.1.1, 1.1.2, etc. The font size for heading is 10 points capital letter and bold face and subsections with 10 points and bold. Do not underline any of the headings, or add dashes, colons, etc. (10 Font size)
Indentations and Equations
The first paragraph under each heading or subheading be supposed to be flush left, and subsequent paragraphs be supposed to have a No-space indentation. A colon is inserted before an equation is accessible, but there is no punctuation subsequent the equation. All equations are numbered and referred to in the text exclusively by a number enclosed in a in a circle bracket (i.e., (2)). Ensure that any miscellaneous numbering system you use in your manuscript cannot be confused with a reference  or an equation (2) designation. (10 Font size)
Figures and Tables
To ensure a high quality product, diagrams and lettering should be either computer drafted or drawn using India ink. Figure captions appear below the figure, are flush left, and are in lower case letters. When referring to a figure in the body of the text, the abbreviation "Fig." is used. Figures are supposed to be numbered in the order they appear in the text. Table captions appear centered above the table in upper and lower case letters. When referring to a table in the text, no abbreviation is used and "Table" is capitalized. (10 Font size)
A conclusion section should be included and be supposed to indicate clearly the advantages, limitations, and possible applications of the manuscript. Although a conclusion may review the main points of the manuscript, do not replicate the abstract as the conclusion. A conclusion might elaborate on the importance of the work or suggest applications and extensions. (10 Font size)
Acknowledgements (10 font size, bold)
An acknowledgement section may be presented after the conclusion, if desired. (10 Font size)
References (10 font size, bold) (must be APA format)
This heading is not assigned a number. A reference list should be 10 Font sizes, included using the following information as a guide. Only cited text references are included. Each reference is referred to in the text by a number with this in a square bracket (i.e., ). References should be numbered and ordered according to where they are first mentioned in the manuscript, not alphabetical arrangement.
- Regupathi, R., Rajalakshmi, M., & Dhivya, E. (2014). Experimental Study on Behavior of Reinforced Concrete Beams with Precast SIFCON Laminates. PENCIS International Journal of Engineering, 1(2), 132-139.
- Book, A. P. P. (1964). The theory of space, time and gravitation.
- Zines, L., Davies, P. M., & Ricketson, S. Chapters in Books. Recent Developments in the Judicial Interpretation of the Australian, 180, 250.
- Abercrombie, N., Hill, S., & Turner, B. S. (1980). The dominant ideology thesis. London: Allen & Unwin.
- York Manuscripts Conference, & York Centre for Medieval Studies. (1989). Latin and vernacular: studies in late-medieval texts and manuscripts;[proceedings of the 1987 York Manuscripts Conference]. A. J. Minnis (Ed.). Brewer.
- Stim, R. (2014). Patent, Copyright & Trademark: An Intellectual Property Desk Reference. Nolo.
Organization of the review article is at the author's discretion and must be at a length of 6 pages, including all kinds of text like abstract to references. Abstract and key words are required. Tables, figures, illustrations and references are to be arranged according to research papers.
Will be Updated soon..
Subscriptions of print and online version of published issues allow you to access all content published in Pencis journals. Subscriptions are payable in advance and all rates include postage and taxes. Subscribers are requested to send payment with their order whenever possible. Issues will only be sent on receipt of payment. Subscriptions are entered on an annual basis. Click below to purchase a paid subscription.
For more information or assistance, please contact:
Subscription Account Representative
E-mail: [email protected]
Recommended for you
Nano Technology Related Societies
Waterloo Institute for Nanotechnology
National Institute for Nanotechnology
National Center for Nanoscience and Technology
Brazilian Nanotechnology National Laboratory
Nano Technology Related Companies
California Molecular Electronics Corp.